FEATURES
Characteristics
Leads to better results
A shallow back design creates lower CG for longer ball flight and a higher launch angle
Confidence-inspiring shape enhances impact which leads to a more consistent ball flight. The lower CG created by an ultrathin crown leads to an increased swing speed and higher ball flight.
Extremely thin crown thickness
Dead to the pin
Unified weight positions placed closer to the sole creates a lower CG, which leads to a more powerful trajectory.
Unified weight positions.
Gives great results from various lies.
A moderately rounded sole works from any lie to pick the ball clean from deep rough or out of the bunker.
Moderate round sole makes it easier to pick the ball clean.
A new VIZARD shaft was developed for Be ZEAL.
Our powerful technological development capabilities, which satisfies the needs of professional golfers, has been utilized to help amateur golfers achieve their full potential.
| EPT-tech Efficient Power Transmission Technology |
| Increased acceleration provided by "low kick point design" |
| Higher launch angle and optimized spin provided by our "total stiffness design" |
| Reduction in power loss on impact with Zxion®, a vibration damping material |
Single-piece design of head + shaft
| Wood : | Grip‐oriented design for longer carry distance, which is easily achieved through a higher trajectory and reduced spin rate. |
| Iron : | Reduction in loss of momentum during follow-through coupled with a special design to create shots with higher trajectories and increased spin rates, which lead to increased backspin. |
ZXION®, a vibration damping material, is used for the tip.
The reduced shock on impact diminishes loss of power on contact.
The reduced head shake helps achieve increased directional stability.
*ZXION® is the registered trademark of KB Seiren, Ltd.
This material is widely used in the sports fields, including catgut for tennis rackets, aircraft, belt reinforcing materials, speaker cones, etc.
SPEC Be ZEAL 525
| Head material / Manufacturing process | SUS630 / Casting | ||||
|---|---|---|---|---|---|
| Face material / Manufacturing process | High-strength custom steel / Rolled | ||||
| # (No.) | U19 | U22 | U25 | ||
| Loft (deg.) | 19 | 22 | 25 | ||
| Lie angle (deg.) | 60.0 | ||||
| Head volume (cm3) | 135 | ||||
| Length (inches) | 40.5 | 40.0 | 39.5 | ||
| Swing weight・ Gross weight (g) |
VIZARD for Be ZEAL | R | DO・328 | DO・332 | DO・336 |
| SR | D1・331 | D1・335 | D1・339 | ||
| S | D1・333 | D1・337 | D1・341 | ||
Made in Japan
SHAFT VIZARD for Be ZEAL
| Material | Carbon+ZXION® | |||
|---|---|---|---|---|
| Kick-point | Mid | |||
| Flex | R,SR,S | |||
| # (No.) | 19 | 22 | 25 | |
| Gross weight (g) | R | 45.0 | 44.5 | 44.0 |
| SR | 46.5 | 46.0 | 45.5 | |
| S | 48.0 | 47.5 | 47.0 | |
| Torque (deg.) | R | 5.50 | 5.50 | 5.50 |
| SR | 5.40 | 5.40 | 5.40 | |
| S | 5.30 | 5.30 | 5.30 | |
| Frequency (cpm) | S | 269 | 274 | 279 |
| S | 277 | 282 | 287 | |
| S | 285 | 290 | 295 | |
Data refers to the shaft only